Esco PROtect Wireless Monitoring System

 Esco PROtect Wireless Monitoring System

View Other Sample Protection Solutions

    • Real Time Monitoring System
      • Wireless Technology that protects your samples 24/7 with continuous data logging function and immediate alarm notifications
      • Centralize monitoring for all your equipment (any brands and any models):
        • -Temperature for refrigerators, freezers, cold chambers, cryogenic tanks and -80 freezers.
        • -Temperature and CO2 for ovens/incubators.
        • -Temperature and humidity for climatic chamber, ambient area
      • Measurement and recording of physical parameters such as temperature, CO2, and humidity.
      • Direct reading on the display.
      • Compared to Wi-Fi, radio frequency has longer battery life and longer transmission distance.
      • Using radio frequency, repeaters can be installed to extend the distance which cannot be easily done by some Wi-Fi system.
    • Alarm Capabilities –Securing Your Samples
      • Real time alarm management
      • Visual and audible alert
      • Remote alarm notification via E-mail.
    • Simple and Cost Effectiveness
      • Fast Installation, commissioning and maintenance.
      • Can centrally monitor integrity of samples even during a power outage or electronic failure of refrigerator, freezer, incubator, oven, etc.
      • Accurate and efficient compared to manual data readings.
      • Reduce labor cost for manual data readings. Manual data readings are less accurate, less reliable and time consuming. Saves you time and money.
      • Readily accessible thru the display or monitoriing software thru PC.
      • Multi-site installation. Multiple buildings can be monitored accros town, another country.
      • Interchangeable digital probes with embedded memory to facilitate maintenance procedures.
      • Modern and eco-friendly.
    • Traceability and Security - Quality Assurance
      • Comply with quality assurance procedures: ISO 17025 and ISO 15189 norms, Good laboratory practices and local regulations recommend the use of tools to guarantee the reliability of your temperature controlled equipment (ultra-low temperature freezers, lab freezers, lab refrigerators, lab ovens, lab incubators, refrigerated incubators, CO2 incubators, etc).
      • Audit trail traceability for conformance to 21 CFR part 11
      • Local regulations or recommendations within Quality Management Programs
    • Remote Monitoring and Datalogging
      • Remote visualization of data 
      • Downloaded database is presented in easy-to-understand reports or graphs 
      • PROtect software enables to visualize recorders located on the installation map and to manage your alarm
    Modems, Relays and Alarm System
    Item CodesDescriptionFeatures/Specifications
    1081050ESCO PROtect UN-1
    -868 Mhz band
    • Single Channel RF Transmitter;-200 to +400°C;
      4-20mA;0.1V;Dry Contact
    1081051ESCO PROtect UN-1
    -902 Mhz band
    1081052ESCO PROtect UN-2
    -868 Mhz band
    • Dual Channel RF Transmitter;-200 to +400°C;
      4-20mA;0.1V;Dry Contact
    1081053ESCO PROtect UN-2
    -902 Mhz band
    1081054ESCO PROtect DG-1
    -868 Mhz band
    • Single Channel RF Transmitter;-40°C
      to 80°C/ tH : -30°C to 70°C from
      0 to 100% RH non-condensing
    1081055ESCO PROtect DG-1
    -902 Mhz band
    1081058ESCO PROtect MD-1
    -868 Mhz band
    • Connects to your PC, it enables communication with Esco PROtect UN/DG
    • Communicates with an unlimited number of recorders.
    • Remote alarm driven by integrated dry contact output
      (vocal telephonic transmitter, buzzer, light).
    • Software, PC or power supply failure alarm.
    • Can be used with or without Esco PROtect Relay.
    1081059ESCO PROtect MD-1
    -902 Mhz band
    1081060ESCO PROtect EMD-1
    -868 Mhz band
    • Enables Ethernet connection to maximize distances
      between recorders and PC servers
    1081061ESCO PROtect EMD-1
    -902 Mhz band
    1081062ESCO PROtect RL-1
    -868 Mhz band
    • Enables direct RF communication to maximize distances between recorders and PC servers.
    • Works with external power supply and supplied with a rechargeable battery.
    • Includes two power ranges: 25 mW to communicate with recorders and
      500 mW to communicate with Modem.
    1081063ESCO PROtect RL-1
    -902 Mhz band
    1081064ESCO PROtect AM-1
    -868 Mhz band
    • Provides real time warning if a problem occurs
    • Integrated sound and visual alarm.
    • Works with an external power supply and supplied with a
      backup battery.
    • Push button for local alarm acknowledgement.
    • Relay output to trigger remote alarm
      (vocal telephonic transmitter …)
    • Warns Esco PROtect software when the battery is low.
    1081065ESCO PROtect AM-1
    -902 Mhz band
     
    Options and Accessories
    Item Codes Description Features/Specifications
    1081070 PROtect Software and Dongle
    • Remote visualization of data.
    • Downloaded database is presented in easy to understand
      reports or graphs.
    • PROtect software enables to visualize recorders located on the installation map and to manage your alarm.
    • Compliant with FDA (CFR 21 part 11)
    • Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.
    1081071 Audible and Visual Alarm Device
    • Warns if a problem occurs.
    • Works with an external power supply.
    • Connects directly to PROtect Modem or to PROtect Alarm.
    • Audible and visual Alarm.
    1081072 PT100 Probe
    • Type of Probe: Pt 100 Class B
    • Measurement range: -200°C to + 260°C
    • Type of cable: 3 wires (3m)
    1081073 Digital Temperature Probe
    • Type of probe: Dallas
    • Measurement range: -40°C to + 80°C (-45°C max)
    • Type of cable: flat 3m cable
    • Embedded memory for gauging parameters storage
    1081075 Battery for Recorders
    • Lithium Battery
    1081076 ESCO PROtect CO 2 probe
    • Measurement range: 0 - 20%
    • Output: 4-20 mA
    • Mounting: Wall mounting bracket supplied
    • Supply: 230VAC
    1081078 Power supply for USB Modem, Ethernet Modem and Alarm System
    • Power Supply for MD-1, EMD-1, AM-1
    1081079 Power Supply for Relay
    • Power Supply for RL-1
    1081080 Universal Adaptor Cable for CO2 and DP sensors
    • (5m) with connector IP67 for PROtect UN and DG.
    1081081 Digital Temperature/Humidity Probe
    • Measurement range: -40 +80°C /0 100%HR
    • Type of probe for T°: Pt 1000
    • class A
    • Accuracy: ±2%HR from 0 to 90%HR
      ±3%HR from 90 to 100%HR
    • Power: delivered by the SPYRF recorder

    1081066

     

     

    PROtect Test-1

    868 MHz

     

    • Use as a recorder to test connection between modem and recorder with

    actual percentage signal

    1081067

     

    PROtect Test-1

    902 MHz

    1081068

     

    PROtect Modem Test-1

    868 MH

     

    • Use as a modem to test connection between modem and recorder with

    actual percentage signal

    1081069

     

    PROtect Modem Test-1 902 MHz

     

    1081070

     

    PROtect Software

    and Dongle

     

    • Remote visualization of data.

    • Downloaded database is presented in easy to understand reports or graphs.

    • PROtect software enables to visualize recorders located on the installation

    map and to manage your alarm.

    • Compliant with FDA (CFR 21 part 11)

    Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.

    1081071

     

    Audible and

    Visual Alarm Device

    • Warns if an alarm occurs.

    • Works with an external power supply.

    • Connects directly to PROtect Modem or to PROtect Alarm.

    • Audible and visual Alarm.

    1081072

     

    PT100 Probe Class B

     

     

     

    • Measurement range: -200°C to + 260°C

    • Type of cable: 3 wires (3m)

    1081288

     

    PT100 Probe Class A

     

    1081289

     

    PT100 Probe Class 1/3 DIN

     

    1081073

     

    Digital

    Temperature Probe

    • Type of probe: Dallas

    • Measurement range: -40°C to + 80°C (-45°C max) accuracy: ± 0.3°C

    • Type of cable: flat 3m cable

    • Embedded memory for gauging parameters storage

    1081075

     

    Battery for Recorders

     

     

    • Lithium Battery for 10 pcs

     

    1081081

     

    Digital Temperature/Humidity Probe

     

    Measurement range : -40 +80°C /0 100%HR

    • Type of probe for T°: Pt 100 Class A

    • Class A

    • Accuracy: ±2%HR from 0 to 90%HR ±3%HR from 90 to 100%HR

    • Power: delivered by the SPYRF recorder

    1081166

     

    Digital (Low) Temperature

     

    • Type of probe: Low Temp Stainless Steel probe

    • Type of cable: 3m Teflon Cable

    • Measurement range from 0°C to -200°C accuracy: ± 0.2°C

    • Immersion of cable: continuous immersion in water and glycolic solutions

    and punctual immersion in alcoholic solutions”

    1081080

     

    Universal Adaptor Cable for CO2 and DP sensors

     

    • (5m) with connector IP67 for PROtect UN and DG.

     

    1081262

     

    SMS Modem

     

    • Warns if any alarm occurs by sending SMS to receiver’s number

    • Needs a SIM card

    • Supports multiple receiver’s number

    • USB Connection

    1081076

     

    PROtect CO2 Probe

     

    • Measurement range : 0 – 20%

    • Output : 4-20 mA

    • Mounting : Wall mounting bracket supplied

    • Supply: 100-240 VAC

    5072029

     

    PROtect Differential

    Pressure Probe

    • Measurement Range: -100 Pa to +100 Pa

    • Output: 4 - 20 mA

    • Supply: 100-240 VAC (include Power Supply 1081263)

    1081078

     

    PROtect Test-1

    902 MHz

     

     

    • Power Supply for MD-1, EMD-1, AM-1

     

    1081079

     

    Power Supply for

    Relay

     

    • Power supply for RL-1

     

    1081167

    PROtect Door Contact

    (With Sliding Doors)

     

    • Use to sense door contact that door is open or close

     

    1081168

    PROtect Door Contact

    (Non-Sliding Doors)

     

    • Use to sense door contact that door is open or close

     

    5072009

     

    PROtect GSM

    Auto Dialer set

     

    • Warns if any alarm occurs by call receiver number (auto dialer)

    • Needs a SIM card

    • Supports until three (3) receiver numbers

    • Supply: 100-240 VAC (include Power Supply 1081291)

    PROtect Server:

    Computer Architecture: 32 bit and 64 bit

    OS: Windows XP, 7 Professional, 8, and Windows 2003 and 2008 Server.

    RAM: 3 GB (min)

    HD: 250 GB capacity or higher

    Video Card: VGA compatible 1280 X 1024 32 bit (minimum) 

     

    PROtect Client:

    Computer Architecture: 32 bit and 64 bit

    OS: Windows XP, 7 Professional, 8, and Windows 2003 and 2008 Server.

    RAM: 2 GB (minimum)

    HD: 1 GB capacity or higher

    Video Card: VGA compatible 1280 X 1024 32 bit (minimum)