VivoCell™ Precise Temperature, CO₂ Control and High Humidity
- Best uniformity and control among competition
- Fast CO₂, temperature and humidity recovery without overshoot
- Direct heat design for rapid recovery, with 8 heater grouped into 3 zones
- Air jacket provides isolation against ambient temperature fluctuations
- VentiFlow™ forced convection accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contamination
- Filtered air circulates across water pan to accelerate humidifying process
- Air flows gently around culture plates, causing no disturbance to cell culture
- Blower automatically stops when door is opened, to minimize mixing of chamber and room air
Contamination Control System Provides Seamless Protection
- SteriSafe™ ULPA filtration enables the chamber air to be maintained at ISO class 5 condition.
- SwiftCon™ 90˚C validated moist heat decontamination cycle operates overnight to eradicate any contamination in the unlikely event it occurs. (decontamination cycle time is 20 hours).
- All input gases are filtered by in-line filters before they enter the chamber to remove impurities and contaminants.
- The incubator’s main body is made from electro-galvanized steel with Esco’s unique ISOCIDE™ antimicrobial coating.
- The interior of the chamber is made from stainless steel type 304.
User-Friendly Software Interface
- Comprehensive user-configurable alarms for all the parameters.
- CelAlert™ alarm system reminds user to replace CO₂ tank and ULPA filter.
- Intelligent data and event logger records all incubator parameters for on screen recall.
- 2 MB built-in flash memory guarantees long term storage of data.
- Diagnostic interface and on line quick help provide comprehensive solutions to frequently encountered problems.
- RS485 data output
Easy-to-Clean
- Chamber is made of shiny stainless steel chamber with all rounded corners.
- Ductwork, plenums and shelves are removable without tools.
- Glass door is removable without tools.
- Inner gasket removable without tools.
Easy-to-Service
- Diagnostic functions in the microprocessor include historical read-out of the parameters.
- Service can be carried out from the top/front
- Esco electronics and sensors have been expertly designed and paired to be inherently drift-free, to minimize need for calibration
North America
Global Site
Australia
China
Europe
France
Germany
Indonesia
Italy
Korea
Malaysia
Myanmar
Pakistan
Philippines
Russia
Singapore
South Africa
Spain
Thailand
UK
Vietnam