Esco
 
  1. Esco
  2. Sample Protection Solutions

Esco PROtect Wireless Monitoring System

Esco PROtect Wireless Monitoring System

Esco PROtect is a truly wireless redundant monitoring system. Operating 24/7, it will send real time local and remote alarms notifications. Esco will help you to PROtect your samples, save you on costs and comply with regulatory requirements in your lab!

Complies to following standards:

  • ISO 17025
  • ISO 15189
  • 21 CFR part 11
Request a Quote
Warranty Registration

View Other Sample Protection Solutions

    FEATURES

    • Real Time Monitoring System
      • Wireless Technology that protects your samples 24/7 with continuous data logging function and immediate alarm notifications
      • Centralize monitoring for all your equipment (any brands and any models):
        • -Temperature for refrigerators, freezers, cold chambers, cryogenic tanks and -80 freezers.
        • -Temperature and CO2 for ovens/incubators.
        • -Temperature and humidity for climatic chamber, ambient area
      • Measurement and recording of physical parameters such as temperature, CO2, and humidity.
      • Direct reading on the display.
      • Compared to Wi-Fi, radio frequency has longer battery life and longer transmission distance.
      • Using radio frequency, repeaters can be installed to extend the distance which cannot be easily done by some Wi-Fi system.
    • Alarm Capabilities –Securing Your Samples
      • Real time alarm management
      • Visual and audible alert
      • Remote alarm notification via E-mail.
    • Simple and Cost Effectiveness
      • Fast Installation, commissioning and maintenance.
      • Can centrally monitor integrity of samples even during a power outage or electronic failure of refrigerator, freezer, incubator, oven, etc.
      • Accurate and efficient compared to manual data readings.
      • Reduce labor cost for manual data readings. Manual data readings are less accurate, less reliable and time consuming. Saves you time and money.
      • Readily accessible thru the display or monitoriing software thru PC.
      • Multi-site installation. Multiple buildings can be monitored accros town, another country.
      • Interchangeable digital probes with embedded memory to facilitate maintenance procedures.
      • Modern and eco-friendly.
    • Traceability and Security - Quality Assurance
      • Comply with quality assurance procedures: ISO 17025 and ISO 15189 norms, Good laboratory practices and local regulations recommend the use of tools to guarantee the reliability of your temperature controlled equipment (ultra-low temperature freezers, lab freezers, lab refrigerators, lab ovens, lab incubators, refrigerated incubators, CO2 incubators, etc).
      • Audit trail traceability for conformance to 21 CFR part 11
      • Local regulations or recommendations within Quality Management Programs
    • Remote Monitoring and Datalogging
      • Remote visualization of data 
      • Downloaded database is presented in easy-to-understand reports or graphs 
      • PROtect software enables to visualize recorders located on the installation map and to manage your alarm

    Modems, Relays and Alarm System
    Item CodesDescriptionFeatures/Specifications
    1081050ESCO PROtect UN-1
    -868 Mhz band
    • Single Channel RF Transmitter;-200 to +400°C;
      4-20mA;0.1V;Dry Contact
    1081051ESCO PROtect UN-1
    -902 Mhz band
    1081052ESCO PROtect UN-2
    -868 Mhz band
    • Dual Channel RF Transmitter;-200 to +400°C;
      4-20mA;0.1V;Dry Contact
    1081053ESCO PROtect UN-2
    -902 Mhz band
    1081054ESCO PROtect DG-1
    -868 Mhz band
    • Single Channel RF Transmitter;-40°C
      to 80°C/ tH : -30°C to 70°C from
      0 to 100% RH non-condensing
    1081055ESCO PROtect DG-1
    -902 Mhz band
    1081058ESCO PROtect MD-1
    -868 Mhz band
    • Connects to your PC, it enables communication with Esco PROtect UN/DG
    • Communicates with an unlimited number of recorders.
    • Remote alarm driven by integrated dry contact output
      (vocal telephonic transmitter, buzzer, light).
    • Software, PC or power supply failure alarm.
    • Can be used with or without Esco PROtect Relay.
    1081059ESCO PROtect MD-1
    -902 Mhz band
    1081060ESCO PROtect EMD-1
    -868 Mhz band
    • Enables Ethernet connection to maximize distances
      between recorders and PC servers
    1081061ESCO PROtect EMD-1
    -902 Mhz band
    1081062ESCO PROtect RL-1
    -868 Mhz band
    • Enables direct RF communication to maximize distances between recorders and PC servers.
    • Works with external power supply and supplied with a rechargeable battery.
    • Includes two power ranges: 25 mW to communicate with recorders and
      500 mW to communicate with Modem.
    1081063ESCO PROtect RL-1
    -902 Mhz band
    1081064ESCO PROtect AM-1
    -868 Mhz band
    • Provides real time warning if a problem occurs
    • Integrated sound and visual alarm.
    • Works with an external power supply and supplied with a
      backup battery.
    • Push button for local alarm acknowledgement.
    • Relay output to trigger remote alarm
      (vocal telephonic transmitter …)
    • Warns Esco PROtect software when the battery is low.
    1081065ESCO PROtect AM-1
    -902 Mhz band
     

    Options and Accessories
    Item Codes Description Features/Specifications
    1081070 PROtect Software and Dongle
    • Remote visualization of data.
    • Downloaded database is presented in easy to understand
      reports or graphs.
    • PROtect software enables to visualize recorders located on the installation map and to manage your alarm.
    • Compliant with FDA (CFR 21 part 11)
    • Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.
    1081071 Audible and Visual Alarm Device
    • Warns if a problem occurs.
    • Works with an external power supply.
    • Connects directly to PROtect Modem or to PROtect Alarm.
    • Audible and visual Alarm.
    1081072 PT100 Probe
    • Type of Probe: Pt 100 Class B
    • Measurement range: -200°C to + 260°C
    • Type of cable: 3 wires (3m)
    1081073 Digital Temperature Probe
    • Type of probe: Dallas
    • Measurement range: -40°C to + 80°C (-45°C max)
    • Type of cable: flat 3m cable
    • Embedded memory for gauging parameters storage
    1081075 Battery for Recorders
    • Lithium Battery
    1081076 ESCO PROtect CO 2 probe
    • Measurement range: 0 - 20%
    • Output: 4-20 mA
    • Mounting: Wall mounting bracket supplied
    • Supply: 230VAC
    1081078 Power supply for USB Modem, Ethernet Modem and Alarm System
    • Power Supply for MD-1, EMD-1, AM-1
    1081079 Power Supply for Relay
    • Power Supply for RL-1
    1081080 Universal Adaptor Cable for CO2 and DP sensors
    • (5m) with connector IP67 for PROtect UN and DG.
    1081081 Digital Temperature/Humidity Probe
    • Measurement range: -40 +80°C /0 100%HR
    • Type of probe for T°: Pt 1000
    • class A
    • Accuracy: ±2%HR from 0 to 90%HR
      ±3%HR from 90 to 100%HR
    • Power: delivered by the SPYRF recorder

    1081066

     

     

    PROtect Test-1

    868 MHz

     

    • Use as a recorder to test connection between modem and recorder with

    actual percentage signal

    1081067

     

    PROtect Test-1

    902 MHz

    1081068

     

    PROtect Modem Test-1

    868 MH

     

    • Use as a modem to test connection between modem and recorder with

    actual percentage signal

    1081069

     

    PROtect Modem Test-1 902 MHz

     

    1081070

     

    PROtect Software

    and Dongle

     

    • Remote visualization of data.

    • Downloaded database is presented in easy to understand reports or graphs.

    • PROtect software enables to visualize recorders located on the installation

    map and to manage your alarm.

    • Compliant with FDA (CFR 21 part 11)

    Note: PROtect software and dongle needs to be installed even if one (1) PROtect recorder (UN or DG) is connected to the equipment.

    1081071

     

    Audible and

    Visual Alarm Device

    • Warns if an alarm occurs.

    • Works with an external power supply.

    • Connects directly to PROtect Modem or to PROtect Alarm.

    • Audible and visual Alarm.

    1081072

     

    PT100 Probe Class B

     

     

     

    • Measurement range: -200°C to + 260°C

    • Type of cable: 3 wires (3m)

    1081288

     

    PT100 Probe Class A

     

    1081289

     

    PT100 Probe Class 1/3 DIN

     

    1081073

     

    Digital

    Temperature Probe

    • Type of probe: Dallas

    • Measurement range: -40°C to + 80°C (-45°C max) accuracy: ± 0.3°C

    • Type of cable: flat 3m cable

    • Embedded memory for gauging parameters storage

    1081075

     

    Battery for Recorders

     

     

    • Lithium Battery for 10 pcs

     

    1081081

     

    Digital Temperature/Humidity Probe

     

    Measurement range : -40 +80°C /0 100%HR

    • Type of probe for T°: Pt 100 Class A

    • Class A

    • Accuracy: ±2%HR from 0 to 90%HR ±3%HR from 90 to 100%HR

    • Power: delivered by the SPYRF recorder

    1081166

     

    Digital (Low) Temperature

     

    • Type of probe: Low Temp Stainless Steel probe

    • Type of cable: 3m Teflon Cable

    • Measurement range from 0°C to -200°C accuracy: ± 0.2°C

    • Immersion of cable: continuous immersion in water and glycolic solutions

    and punctual immersion in alcoholic solutions”

    1081080

     

    Universal Adaptor Cable for CO2 and DP sensors

     

    • (5m) with connector IP67 for PROtect UN and DG.

     

    1081262

     

    SMS Modem

     

    • Warns if any alarm occurs by sending SMS to receiver’s number

    • Needs a SIM card

    • Supports multiple receiver’s number

    • USB Connection

    1081076

     

    PROtect CO2 Probe

     

    • Measurement range : 0 – 20%

    • Output : 4-20 mA

    • Mounting : Wall mounting bracket supplied

    • Supply: 100-240 VAC

    5072029

     

    PROtect Differential

    Pressure Probe

    • Measurement Range: -100 Pa to +100 Pa

    • Output: 4 - 20 mA

    • Supply: 100-240 VAC (include Power Supply 1081263)

    1081078

     

    PROtect Test-1

    902 MHz

     

     

    • Power Supply for MD-1, EMD-1, AM-1

     

    1081079

     

    Power Supply for

    Relay

     

    • Power supply for RL-1

     

    1081167

    PROtect Door Contact

    (With Sliding Doors)

     

    • Use to sense door contact that door is open or close

     

    1081168

    PROtect Door Contact

    (Non-Sliding Doors)

     

    • Use to sense door contact that door is open or close

     

    5072009

     

    PROtect GSM

    Auto Dialer set

     

    • Warns if any alarm occurs by call receiver number (auto dialer)

    • Needs a SIM card

    • Supports until three (3) receiver numbers

    • Supply: 100-240 VAC (include Power Supply 1081291)

    PROtect Server:

    Computer Architecture: 32 bit and 64 bit

    OS: Windows XP, 7 Professional, 8, and Windows 2003 and 2008 Server.

    RAM: 3 GB (min)

    HD: 250 GB capacity or higher

    Video Card: VGA compatible 1280 X 1024 32 bit (minimum) 

     

    PROtect Client:

    Computer Architecture: 32 bit and 64 bit

    OS: Windows XP, 7 Professional, 8, and Windows 2003 and 2008 Server.

    RAM: 2 GB (minimum)

    HD: 1 GB capacity or higher

    Video Card: VGA compatible 1280 X 1024 32 bit (minimum)

    ©2024 Esco Micro Pte Ltd. All rights reserved.   Data Privacy Policy  Terms and Conditions